
Add to Cart
EV Charger Station Charging Procedure
Follow these steps for easy charging
1. Pull up to the charging point and turn off car.
2. Make sure car is unlocked with no charge settings/timers turned on.
3. Plug the Type 2 Male end into the charging unit - The LED will turn SOLID BLUE.
4. Plug the Type 2 Female end into your cars charging port - The LED will turn SOLID GREEN.
5. Lock your car and leave to charge. (Also locks the cable if car supports)
6. After charging always remove the plug from the car first and then the charging unit.
a. Amp Selector on the side of the unit allows you to change between 6A, 13A, 16A, 32A. Allowing you to install on any power supply.
b. Built-in 6 mA DC Sensitive fault protection device which conforms to the 18th edition wiring regulations, meaning no Type B RCD needed at source.
c. Product built from the ground up to be easy to install and maintain.
EV Charger Station Features:
Model Name | EVC10-07C1S | EVC10-07C1C | EVC10-22C1S | EVC10-22C1C | |
Input Rating | 230±10%Vac (One Phase) | 400±10%Vac (Three Phase) | |||
Frequency | 50Hz | ||||
Input Current | 32A | ||||
Output Current | 32A | ||||
User Authentication | RFID (ISO 14443) | ||||
External | LAN (optional) + 4G (optional) or Wi-Fi (optional) | ||||
Internal | OCPP 1.6 JSON (OCPP 2.0 compatible) | ||||
Operating Temperature | -22˚F~122˚F(-30˚C~50˚C) | ||||
Humidity | Max. 95% RH | ||||
Altitude | ≦ 2000m | ||||
IP Level | IP 54 | IP65 for box | IP 54 | IP65 for box | |
Dimension(WxDxH) | 350x250x175mm (13.8″x9.8″x6.9″) | 350x250x130mm (13.8″x9.8″x5.1″) | 350x250x175mm (13.8″x9.8″x6.9″) | 350x250x130mm (13.8″x9.8″x5.1″) | |
Charging Outlet | One Socket | 5M Cable | One Socket | 5M Cable | |
RCD | RCD TYPE B | ||||
Charging Interface | Type 2 Plug | ||||
Multiple Protection | Over current, Under voltage, Over voltage, Residual current, Surge protection, Short circuit, Over temperature, Ground fault, Current leakage protection |